← Back to blog
11 November 2026

Understanding COP > 4: The Efficiency Benchmark of Our Preferred Heat Pump Brands

With gas prices sometimes already reaching €1.90 per m3, the end of net metering approaching next year, and subsidies dropping sharply, now is the moment for a heat pump. But one technical term often causes confusion: COP > 4. If you are comparing systems and want to know what that number means in real life, this guide explains it clearly.

At Slim van het gas af, we focus on personal advice, professional installation, and optimization for households that want to move away from gas intelligently. We work with proven A-brands including Weheat, Vaillant, NIBE, and Mitsubishi Electric, and we tailor recommendations to the home, the occupants, and expected use. In this article, you will learn what COP > 4 means, why it matters, how it relates to daily savings and comfort, and what to look at beyond the headline number.

What does COP > 4 mean?

COP stands for Coefficient of Performance. It is a simple way to express how efficiently a heat pump converts electricity into usable heat.

If a heat pump has a COP of 4, that means:

So when people talk about COP > 4, they mean the heat pump can deliver more than four times as much heat energy as the electrical energy it consumes under the stated test condition.

That is the core reason heat pumps are considered such an efficient alternative to traditional gas-based heating. Instead of generating all heat directly from fuel, a heat pump moves heat and upgrades it to a useful temperature for the home.

The short answer

A COP above 4 means a heat pump can produce more than four units of heat for every unit of electricity used. In practice, that points to high efficiency and strong potential for lower energy use when the system is matched well to the home.

Why COP matters more than ever right now

Efficiency has always mattered, but current market conditions make it even more important. Three developments stand out:

Together, these factors increase the value of acting sooner rather than later. A well-chosen heat pump can reduce dependence on gas, use electricity more intelligently, and help homeowners take advantage of available support while it is still more favorable.

You can currently benefit from subsidies up to €3.025.

COP versus SCOP: what is the difference?

When comparing heat pumps, it is important to know that COP and SCOP are not the same thing.

COP

COP measures efficiency at a specific operating condition, often linked to a specific water temperature such as 35°C.

This makes COP useful for:

SCOP

SCOP stands for Seasonal Coefficient of Performance. It gives a broader picture of performance over an entire heating season.

SCOP is often more useful for homeowners because it better reflects:

In other words, COP tells you what the system can do in a given situation, while SCOP gives a better impression of what you may experience over time.

Practical performance figures from installed systems

Every home is different, which is why heat pump advice should always start with a personal analysis of the property, household wishes, and usage. Still, practical examples help make the numbers more concrete.

Below are example performance figures from installed systems:

Home type Brand example COP (35°C) SCOP
1930s/1950s home (hybrid, after insulation) Vaillant aroTHERM 4.2 3.5–3.8
New-build, all-electric Mitsubishi Ecodan 4.6 4.0–4.5
Villa, ground-source water system NIBE F-series 5.0 4.6–5.0

These are average practical values based on customers.

The takeaway is clear: COP above 4 is not a theoretical marketing number. It appears in real installed projects, but the achieved outcome depends strongly on the type of home, insulation level, system design, and the chosen heat source.

Which heat pump brands do we prefer?

We install proven A-brands and advise based on the situation rather than pushing a standard package. The brands we work with are:

Each has its own strengths.

Weheat

Weheat is described as:

WeHeat systems run on R290 (propane), can be controlled intelligently with dynamic tariffs, and have A+++ label performance.

Vaillant

Vaillant is known for:

Vaillant also uses R290 (propane) in the referenced systems and can be controlled with dynamic tariffs.

NIBE

NIBE stands out for:

Mitsubishi Electric

Mitsubishi Electric is recognized for:

Why COP > 4 does not tell the whole story

A high COP is a strong sign, but it should never be the only thing you judge.

Several other factors have a major influence on long-term satisfaction:

That is why choosing the right installer matters just as much as choosing the right unit. Good system design, proper commissioning, and brand knowledge all affect the final result.

How software and smart control improve real-world savings

Heat pump performance is not only about hardware. Smart control plays an increasingly important role in lowering running costs.

The top-class brands highlighted for maximum savings and comfort are Weheat, Vaillant, and NIBE. They combine strong hardware with flexible software.

Key advantages include:

A major benefit of smart control is that the system can heat the home when electricity prices are low. According to the provided information, this can save around 15%–40% extra on the energy bill.

This matters even more as the electricity market becomes more dynamic and as households look for better ways to coordinate heating, solar generation, and home energy use.

What kind of home benefits most from COP > 4?

The answer depends on the property and the chosen system design.

Hybrid systems

In an insulated older home, a hybrid heat pump can already deliver strong performance. One practical example shows a Vaillant aroTHERM in a 1930s/1950s home with a COP of 4.2 and SCOP of 3.5–3.8.

For homeowners not ready to go fully all-electric, this can be an important step away from gas.

All-electric systems

In a new-build home, an all-electric solution can perform very efficiently. The example of a Mitsubishi Ecodan shows COP 4.6 and SCOP 4.0–4.5.

This type of setup suits homes with lower temperature heating and a design optimized for efficiency.

Ground-source systems

For households seeking top-tier efficiency, a ground-source setup can go even further. The example of a NIBE F-series in a villa shows COP 5.0 and SCOP 4.6–5.0.

These systems are more custom in nature, but they can deliver very high savings potential and added benefits such as free cooling.

What should homeowners ask before choosing a heat pump?

If you want to understand whether COP > 4 will translate into real savings in your own home, ask these questions:

  1. Is the recommendation based on my home type and energy use?
  2. Is the system hybrid or all-electric, and why?
  3. What is the COP at 35°C and what is the expected SCOP?
  4. How will the system work with dynamic electricity tariffs?
  5. Which brand best fits my insulation level, sound preference, and comfort expectations?
  6. How strong are service, warranty, and parts availability?

These questions help shift the conversation from brochure claims to practical outcomes.

Practical takeaways: how to use COP numbers wisely

Here are the most useful rules of thumb.

1. See COP > 4 as a quality signal

A COP above 4 is a strong indicator that you are looking at an efficient heat pump. It is a good starting point for comparison.

2. Always combine COP with SCOP

A strong seasonal result matters more than a single headline figure. Ask how the system is expected to perform over the heating season.

3. Match the system to the home

The best heat pump for a villa is not automatically the best heat pump for a terraced home. Home type, insulation, and heat demand all matter.

4. Look beyond hardware

Software, smart control, and the ability to respond to dynamic tariffs can significantly improve actual savings.

5. Prioritize proven brands and expert installation

Reliability, quiet operation, stable performance, and aftercare all influence long-term satisfaction.

If you want to go deeper, these subjects are also highly relevant when choosing a system:

These topics help put COP into a broader decision-making framework.

Conclusion: COP > 4 is important, but the right match is everything

COP > 4 is a meaningful efficiency benchmark. It tells you that a heat pump can deliver a high amount of heat from a relatively small amount of electricity. In a market where gas is expensive, net metering is ending, and subsidies are falling, that matters more than ever.

But the best outcome does not come from chasing the highest number alone. It comes from choosing the right system for your home, using a proven brand, and ensuring expert installation and smart control.

At Slim van het gas af, we provide personal and honest advice, work with top brands with strong performance and smart software, and ensure professional installation. If you want clear insight into what a heat pump can achieve in your home, now is the time to take the next step.

Request a quote and discover which heat pump solution fits your home best — and how much you can still benefit from subsidies up to €3.025.