← Back to blog
17 November 2026

Hybrid Warmtepomp Optimisation: Fine-Tuning Gas and Electricity for Maximum Savings

Gas prices are shooting through the roof, sometimes already reaching €1.90 per m3. At the same time, net metering will end next year and subsidies will be reduced sharply. That makes hybrid warmtepomp optimisation more relevant than ever. If you want to lower your gas use without switching fully off gas immediately, a hybrid system can be a smart step—especially when it is tuned properly.

A hybrid heat pump works together with your existing boiler. The heat pump handles most of the heating, while the boiler supports hot tap water and helps on very cold days. When that balance is set up well, you can achieve meaningful savings, improve comfort, and prepare your home for a more gas-free future. In this article, you will learn how hybrid warmtepomp optimisation works, what affects performance, and how to get the most from your system.

What is hybrid warmtepomp optimisation?

Hybrid warmtepomp optimisation is the process of fine-tuning how a hybrid heat pump and boiler work together so your home uses as little gas as possible without sacrificing comfort.

In practical terms, optimisation focuses on:

For many homeowners, the biggest mistake is to think installation alone is enough. In reality, performance depends heavily on how the system is installed and how the software is configured. That is where real savings are made.

How a hybrid warmtepomp saves energy

A hybrid warmtepomp works alongside your central heating boiler. The heat pump provides the majority of space heating, while the boiler steps in for warm tap water or during colder peak moments.

This setup is especially suited to homeowners who want to make progress now without immediately moving to a fully all-electric home. It is often described as an ideal intermediate solution.

According to the company’s guidance across its service areas, a hybrid system can reduce gas use by up to 70%. That makes optimisation worthwhile, because even small improvements in operation can translate into lower energy bills over an entire heating season.

Why optimisation matters more now

The case for hybrid warmtepomp optimisation is stronger today than it was just a few years ago.

1. Gas has become expensive

When gas costs rise to €1.90 per m3, every cubic meter you do not burn matters more. A hybrid setup already lowers gas dependency, but careful tuning helps you push that reduction further.

2. Electricity needs to be used more strategically

With salderen ending next year, homeowners benefit more from using electricity intelligently instead of relying on old assumptions about exported solar power always having the same value. This makes smart control and timing more important.

3. Subsidies are still available now

If you act in time, you can still benefit from subsidies up to €3.025. With subsidies expected to fall sharply, delaying a decision may make the same investment less attractive later.

Hybrid or all-electric: where optimisation fits

Not every home should make the same choice. In well-insulated homes, an all-electric warmtepomp is often the preferred direction because it allows you to go fully off gas and offers the most future-proof path.

Still, a hybrid warmtepomp remains a valuable option when:

A hybrid system works best in well-insulated homes or homes that are already reasonably insulated. If you are still deciding between system types, it also makes sense to explore related topics such as hybrid vs. all-electric warmtepompen and whether your home is suitable based on a heat loss calculation.

The main factors in hybrid warmtepomp optimisation

1. Insulation quality of the home

The better your insulation, the more heating can be handled by the heat pump instead of the boiler. Heat pumps operate most efficiently when they can deliver steady heat into a home that retains warmth well.

That is why optimisation always starts with the home itself, not just the machine. A system in a better-insulated house can run longer and more effectively on electricity, reducing boiler support.

2. Low-temperature heating potential

A hybrid heat pump performs better when the heating system can operate at lower water temperatures. In general, lower-temperature heating helps heat pumps work more efficiently.

This does not always mean a full replacement of your heating system is needed, but it does mean your setup should be assessed carefully.

3. Boiler support settings

One of the most important parts of hybrid warmtepomp optimisation is deciding when the boiler takes over.

If the boiler starts too quickly:

If the heat pump is allowed to cover more of the heating demand before the boiler steps in, the system can usually achieve better overall gas reduction—provided comfort is maintained.

4. Smart software and control logic

The company makes clear that real savings depend not only on the heat pump itself, but also on the way it is installed and the software on the warmtepomp.

Smart control can help with:

Advanced control software can also use the home as a kind of thermal battery, storing warmth in the building at the right moment so less expensive energy can be used more effectively. That concept matters even more as households become more conscious of when electricity is cheapest or most beneficial to use.

5. Correct system sizing and heat loss insight

An efficient hybrid system starts with understanding the home’s heating demand. A heat loss calculation helps determine what the property actually needs and supports smarter choices in setup and tuning.

Without that foundation, it becomes harder to decide how much work the heat pump can realistically carry and where the boiler should still support.

What does an optimised hybrid system look like?

A well-optimised hybrid setup usually has several clear characteristics:

Optimisation area What good performance looks like
Heating balance The heat pump handles most of the space heating
Boiler role The boiler mainly supports hot tap water and cold peaks
Energy use Gas consumption is reduced significantly
Controls Smart settings match comfort with lower running costs
Installation The system is configured carefully, not just installed quickly
Future readiness The home can keep progressing toward lower gas dependence

Practical tips for homeowners

If you want stronger results from your hybrid system, focus on these steps.

1. Check whether your home is insulated well enough

A hybrid system works best in a home that is already reasonably insulated. Improving insulation can increase the share of heating handled by the heat pump.

2. Ask how the boiler and heat pump are balanced

Do not only ask which unit is being installed. Ask how the system will decide when the boiler should assist. That question often says more about future savings than the product name alone.

3. Choose a setup with smart control

Software matters. Smart energy control can help use electricity more effectively, especially when working with dynamic energy tariffs or solar power.

4. Think beyond today’s bill

A hybrid system can be a useful transition step, but it is still important to consider where your home is heading. In some homes, hybrid is the right move now while keeping the door open for a more all-electric future later.

5. Use current subsidy conditions while available

With subsidies up to €3.025 and reductions expected ahead, timing matters. Acting sooner can improve the financial case.

Common questions about hybrid warmtepomp optimisation

Does a hybrid warmtepomp always save gas?

Yes, the purpose of a hybrid warmtepomp is to reduce gas use by letting the heat pump do most of the heating work while the boiler supports only where needed.

How much gas can a hybrid warmtepomp save?

A hybrid system can save up to 70% gas, depending on the home and the setup.

Is a hybrid warmtepomp still a smart choice if all-electric is better long term?

Yes, in homes that are not yet fully ready for all-electric, a hybrid system can be a practical step that starts saving immediately while supporting a future transition.

Why is software important in a hybrid system?

Because savings depend not only on the hardware, but also on how the system is controlled. Good software helps the system heat at the right time, use cheaper electricity more effectively, and improve overall efficiency.

When to consider all-electric instead

Although this article focuses on hybrid warmtepomp optimisation, it is worth saying clearly: in a well-insulated home, an all-electric warmtepomp is often the preferred option. It gets you fully off gas, is more future-proof, and is often the recommended route when the home is ready for it.

That is why a good advisor should not push one standard answer. The right approach depends on:

The real key to maximum savings

The biggest lesson is simple: maximum savings do not come from buying a hybrid warmtepomp alone. They come from combining the right system choice with careful installation, smart control, and a setup that fits the home.

That is especially true now, with:

In other words, this is exactly the moment to look seriously at whether a hybrid or all-electric warmtepomp fits your home best.

Conclusion: optimise now, save sooner

Hybrid warmtepomp optimisation is about getting the most from the balance between gas and electricity. When a hybrid system is tuned well, the heat pump does the bulk of the work, the boiler supports only where needed, and the homeowner benefits from lower gas use, better control, and a smarter path toward sustainability.

For many existing homes, that makes hybrid an effective step. For well-insulated homes, all-electric may be the stronger long-term answer. In both cases, the quality of the advice, installation, and software setup makes a major difference.

If you want to know what is smartest for your home, ask for a tailored assessment. Explore topics such as hybrid vs. all-electric warmtepompen, all-electric installation, and a heat loss calculation, or request a quote and discover which setup delivers the best savings for your situation.